ANTENTOP- 01- 2014 # 018

Simple Regenerator Receiver with Loop Antenna

Aleksandr Bulanenko, UA6AAK

It is next generation of simple battery powered regenerative receiver. The receiver used to the input inductor as antenna. It was made two inductors, one for 3.3- 14.6- MHz another one for 4.0- 19.0- MHz.

Figure 1 shows schematic of the receiver. Figure 2 shows design of the Loop inductors of the receiver. Picture shows design of the receiver. Audio files of the receiver you may find at youtube.

Video plus Audio: https://www.youtube.com/watch?feature=player_embedded&v=T9qw_UBhRlM

Figure 1 Schematic of Simple Regenerator Receiver with Loop Antenna

Figure 2 Design of Loop inductors of the receiver

www.antentop.org

Page- 84