Losses of RF Power when Feeder works at SWR mode
|
|
 |
 |
 |
|
|
Antentop is FREE e-magazine devoted to Antennas and Amateur Radio an
Special page devoted to
Losses of RF Power when Feeder works at SWR mode
Losses of RF Power when Feeder works at SWR mode: by Igor Grigorov, RK3ZK
If a feeder has a characteristic impedance differ compare to the load a part of RF power going from the transmitter in the feeder is reflected from the load back to the transmitter. In this case the load uses a part of RF power of the transmitter. Table 1 shows the losses of RF power when a feeder has SWR.
PDF file, 180 KB (ANTENTOP-02-2004, p.: 72)
Contents for AntenTop 02- 2004
 |
 |
 |
 |
|
|
|||
Just for Fun:
Powered byIP2Location.com
Thanks for your time!
Last Updated:
February 4, 2018 22:25
